[Ccarc] DK MODS news letter
Tom Murray
kb9wsl at hotmail.com
Mon Aug 11 08:43:19 EDT 2008
Newsletter from MODS.DK 10. Aug 2008
From:
mods.dk (web at mods.dk)
Sent:
Mon 8/11/08 12:59 AM
To:
kb9wsl at hotmail.com
This is the mods.dk newsletter.
Note, if you have trouble by read the newsletter then you can download a HTML version at http://www.mods.dk/0832.html
In this Edition, you will find a list of all the new & updated articles now on our site.
New articles.
Created: 17-06-2008 Icom IC-706MKIIG
Subject: Erratic operation-distorted audio etc. ICOM IC 706 MKIIG
Year 2000, my new prestigious ICOM IC706 MkIIG started serving me in the
HF and VHF bands without any issues. In 2005-2006, the equipment was kept
...
Click here to view the article.
Created: 19-06-2008 Icom IC-F33
Subject: Modification to radio Icom IC-F33
When programed for user set mode it allows access to mic gain, sql level,
backlight, battery voltage.
Corrected update
Even though your radio may n...
Click here to view the article.
Created: 20-06-2008 Icom IC-7700
Subject: TX/RX Frequency expansion of IC-7700
RX frequency coverage expansion
Remove D52, D53, D54 and D55 as shown below.
TX frequency coverage expansion
Add D51 and remove D56, D57, D58 and...
Click here to view the article.
Created: 30-06-2008 Icom IC-275
Subject: ICOM IC-275D to IC-275H Conversion
Background
The IC-275D is a popular 2 metre, 100Watt
All-Mode VHF Transceiver specifically made by ICOM for the Japanese (JA) market.
The ...
Click here to view the article.
Created: 06-07-2008 Icom IC-02
Subject: Audio modificationfor Icom IC-02, 03 and 04 Handheld Radios
This audio mod works on the 02, 03 and 04AT. It increases the level of the
transmit audio (i.e. the modulation), as well as rolling off some of the
...
Click here to view the article.
Created: 20-07-2008 Icom HM-103
Subject: Microphone mod for ICOM HM-103
This modification is to solve the low audio that gives the microphone to the transceiver, in my case the IC-706MKIIG.
We must dismantle completely th...
Click here to view the article.
Created: 21-07-2008 Icom IC-260
Subject: Frequency expansion mod for IC-260E
Directly got from ICOM Europe by support request!
To enlarge the frequency range from 144 to 148 Mhz (orignial from 144 - 146 Mhz) just put an diode ...
Click here to view the article.
Created: 23-07-2008 Icom IC-7200
Subject: IC-7200 Band Voltage Modification
If
you want to connect an external unit which can be controlled by the
band voltage from ACG connector, the modification is necessary as at
right.
Do...
Click here to view the article.
Created: 31-07-2008 Icom IC-2100
Subject: Modification for ICOM 2100 microphone
Modification on ICOM 2100 Microphone solves the PTT fail problem.
Text on pic : change this 10 K resistor for one 1 K or 2,2 K res.
Click here to view the article.
Created: 02-08-2008 Icom IC-706MKIIG
Subject: Increasing The CTCSS Level Of The Icom IC-706MKIIG
My
IC-706MKIIG (and maybe all versions of the 706 radio) had very low
CTCSS (Encode tone). I was dropping out of my 440 MHz repeater all the
time.
Wh...
Click here to view the article.
Created: 07-08-2008 Icom IC-92
Subject: Mars/CAP Mod for Icom IC-92AD (Simple method)
Hey, DON'T TAKE YOUR RADIO APART FOR THE MOD!!!
You can just take the battery pack off, take off the sticker and remove the "MU" diode without
p...
Click here to view the article.
Created: 07-08-2008 Icom IC-2820
Subject: Proper Crossband Repeat Method for IC-2820
The
information in the other article is incorrect. You don't even have to
do ANY mod to the radio to make this work. Follow these instructions
and...
Click here to view the article.
Created: 18-06-2008 Kenwood TK-8162
Subject: klaxon mod kenwood tk-8162
To activate the output of this radio on cell call klaxon you have to remove the resistor R95 from the main board first.
remove top cover,
remo...
Click here to view the article.
Created: 11-07-2008 Kenwood TR-7800
Subject: Intermittent display failure for TR-7800
The
particular TR-7800 that I have has suffered with intermittent display
failures for some years. I seem* to have finally traced the fault back
to th...
Click here to view the article.
Created: 02-08-2008 Kenwood TM-431
Subject: How to change TM431 display lamps to LEDs
Disassemble the front panel until you can solder the old blown 6V lamps out.
Put a 220 ohm resistor and an ultra bright 3mm blue LED in series in the...
Click here to view the article.
Created: 04-08-2008 Kenwood TS-930
Subject: Changing meter lamps to led for TS-930 and TS-940
The blue are green leds make a great lighting system.
For the TS-930 and the TS-940, it is easy to use the T3 are the T4 3 vdc led lamps in the radio...
Click here to view the article.
Created: 07-08-2008 Kenwood TS-820
Subject: TS-820(S) Improved receive audio (hiss reduction)
I
have noticed with the TS-820 series that on receive, there is a
significant noise component contributed by the audio stages after the
detector. I be...
Click here to view the article.
Created: 18-06-2008 Other MISC
Subject: Level 2 menu - LSB mode activation & other functions JRC JSB-196
JRC JSB-196 is a DSP marine HF transceiver (Output Power 150W PEP).
In order to use the transceiver on the lower ham bands (40,80,160m) where LSB mod...
Click here to view the article.
Created: 18-06-2008 Other MISC
Subject: Expand TX and RX on Albrech RL-102
Expand TX and RX is possible by pressing "Lamp" and 3 while turning radio power on , this reset all memories.
To return radio back to original stat...
Click here to view the article.
Created: 31-07-2008 Other MISC
Subject: Adding Lower Sideband to the RT-320 (Racal PRC-320)
The
RT230 (UK/PRC 320) is a super rig for amateur use, particularly on
7MHz, where its limitation to 30WPEP is not a problem. But it is
precisely on ...
Click here to view the article.
Created: 14-07-2008 Radio Shack PRO-2039
Subject: Operation Realistic (Radio Shack) Pro-2039
PRO-2039 Scanner (200-0462)Operation
TURINING ON THE SCANNER/SETTING VOLUME AND SQUELCH
Turn SQUELCH full counter-clockwise.
Turn VOLUME cl...
Click here to view the article.
Created: 18-06-2008 Yaesu FT-950
Subject: Firmware version in FT-950
Hold GEN + 50 + ENT when Power on. Display will show firmware version. Re-power to turn it to normal operation
Click here to view the article.
Created: 22-06-2008 Yaesu FT-847
Subject: how to wire up a dynamic karaoke mic for a yaesu 847
To make a homebrew desk mic i used a 600ohm dynamic karaoke mic with an
XLR connector on the back with extremely good results, to do this first
get ...
Click here to view the article.
Created: 22-06-2008 Yaesu FT-920
Subject: FT-920 Filter switch board modification
The FT-920 Switch Board allows the use oftwo fihers in place ofone. Either one filter
or two in cascade may be selected. An amplifier with adjustable...
Click here to view the article.
Created: 29-06-2008 Yaesu VX-3R
Subject: Intermitent and no TX audio with Yaesu VX-3R.
My
brand new VX-3R had an intermitent / no TX audio problem right out of
the box. A fellow ham had the same problem with another VX-3R bought
the same...
Click here to view the article.
Created: 02-07-2008 Yaesu FT-8900
Subject: Remote Mount Cable with integrated Audio cable for FT-8900
Here is a Mod to make a remote mount cable and integrated audio.
What you will need is a length of CAT5 or CAT6 Network cable or some flat
8 core Mo...
Click here to view the article.
Created: 11-07-2008 Yaesu FT-817
Subject: FT-817 final amplifier destructive self-oscillation cured
After replacing my FT-817's finals for the third time, I could take no more! So I set out to find what caused the problem.
Donwload the complete ...
Click here to view the article.
Created: 25-07-2008 Yaesu FT-101
Subject: Unstable VFO drifting foo FT-101e
FT-101e frequency drifting to fast.
VCO voltage is normal
FET and transistor are all ok
shorted defective 650 pf silver mica capacitor loca...
Click here to view the article.
Revised articles since our last newsletter.
Note, sometimes it can be difficult to see the changes since
the update can be a little correct in the text, but sometime the update
can be a new picture to the existing article.
Updated: 08-07-2008 Icom IC-2820
Subject: ICOM IC-2820H Extended Transmit Modification for USA Models
This
modification has been tested and confirmed for USA models ONLY,
including those with the most recent firmware from revisions from ICOM
as of 06...
Click here to view the article.
Updated: 11-07-2008 Kenwood TS-440
Subject: Circuit Improvements for the TS-440S
Updated December, 2002
PROBLEM: Distortion level in SSB transmitted signal not acceptable. FIXES:
1. Increase the supply V to the max rated16VDC to ...
Click here to view the article.
Updated: 22-07-2008 Kenwood TS-940
Subject: TS-940 fan mod
This
is a mod to cause the TS-940 cooling fan to come on sooner (lower temp)
and to run a little faster. This helps prevent destruction of the 29v
pas...
Click here to view the article.
Updated: 12-07-2008 Yaesu FT-1000
Subject: FT-1000 60M MARS/CAP transmit modification
Thanks to Bill k0zl for the pictures.
Remove power and antenna cable.
Open case as explained in your "operating manual".
Locate four screws...
Click here to view the article.
Regarding your Subscription !
If you do not wish to receive this newsletter any more, then you can unsubscribe from it, by going to http://www.mods.dk
and scroll down to the newsletter field. Enter your mail address and
click on the removal button. You will then receive a message that
confirms you have been unsubscribed.
Best regards
mods.dk
_________________________________________________________________
Reveal your inner athlete and share it with friends on Windows Live.
http://revealyourinnerathlete.windowslive.com?locale=en-us&ocid=TXT_TAGLM_WLYIA_whichathlete_us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ns1.culcom.net/pipermail/ccarc/attachments/20080811/0ad2a5ee/attachment-0001.htm
More information about the ccarc
mailing list